Pan, routing, mute and solo 51
VeniceF
Operator Manual
Group sends
Group sends are post-EQ, post-mute and post-fader. The group sends can be
configured in either of two modes using the mono sum switch:
• mono sum switch out (stereo) Each pair of groups behave as if they were
stereo groups. The relative odd and even numbered send level is controlled by the
bal control knob.
• mono sum switch in (mono) The stereo signals are sent to the group buses as a
mono sum of left and right.
This selection is on a channel-by-channel basis and, therefore, some may be assigned
to the groups as mono or as stereo depending upon the desired usage. This is
especially useful if the stereo input is to be used as a mono input.
To Next Page
Loading...
Need help?
General
