Need help?Do you have a question about the Midcontinent MD302-3 and is the answer not in the manual?
General| Brand | Midcontinent |
|---|---|
| Model | MD302-3 |
| Category | Control Unit |
| Language | English |
Describes the MD302 SAM as a self-contained situational awareness instrument providing attitude, altitude, airspeed, and slip indication.
Details electrical, physical, performance limits, and qualification certifications for the MD302 SAM.
Lists ARINC 429 input and output data labels and their configurable speed options.
Explains the safety symbols (Warning, Caution) used throughout the manual to identify hazards.
Discusses acceptable installation locations and clearance requirements for the MD302 SAM within the aircraft.
Details TSO approval limitations, specific deviations, and operational constraints for the MD302.
Explains the nameplate and MOD status, indicating hardware design changes and their implications.
Provides an overview of interconnect diagrams and installation information for the MD302 SAM.
Lists the components included with the MD302 SAM for installation, including part numbers.
Instructs on constructing the cable harness, including connector pinout and wiring practices.
Details the pneumatic connections for pitot and static ports, including fitting types and tubing requirements.
Outlines final checks, leak tests, and initial status light indications after installation.
Explains how to configure the MD302 SAM using a USB interface and a configuration file.
Describes the procedures for calibrating the MD302 SAM's pressure and heading functions.
Details the process for performing on-aircraft heading calibration for the MD302 with a magnetometer.
Outlines requirements for continued airworthiness, including system verification and software updates.
Lists the environmental tests and conditions the MD302 SAM has been qualified against.
To Next Page
