Manual Number 9018233 Revision C, February 21, 2022
10
2.3 MODIFICATION
This product has a nameplate that identifies the manufacturer, part number, description,
certification(s) and technical specifications of the unit. It also includes the “MOD” or modification
number representing notable changes in the hardware design of the unit.
Modification (MOD) 0 is the initial release of the product and is identified on the nameplate by the
lack of marking on the MOD numbers 1 through 9 (i.e. 1-9 are visible). All subsequent modifications
are identified on the nameplate by the marking/blacking out of that particular MOD number (i.e. for
MOD 1, the number 1 is not visible and 2-9 are visible - see Figure 2.2 for examples). MODs do not
have to be sequentially inclusive and may be applied independent of each other.
For additional details regarding specific changes associated with each MOD status refer to the
product published Service Bulletins at www.mcico.com or www.flysam.com.
Figure 2.2
Nameplate and MOD Status Example
MOD 0
MOD 1
MOD 1
& MOD 2
To Next Page
Loading...
Need help?
General
