Flight Mode / AIRSPEED OPERATION
The Airspeed Limitations, also known as “V-speeds” or Range
Marks, are indicated with colored range marking bands placed
vertically along the left margin next to the Airspeed Scale. The colors
and values of each bar can be set during installation in Conguration
Mode by the installer only. This setting is not available in Flight Mode.
Colors must be selected based on industry-dened colors and
V-speed limits as dened by the aircraft’s specic Pilot’s Operating
Handbook (POH). Range markings are represented by full-width
bars, half-width bars and/or radial marks. A traditional ‘barber pole’
or ‘barber pole’ radial may also be displayed if the aircraft requires
and provides the appropriate V
ne
, V
mo
and/or M
mo
values.
REV. F Sept 15, 2015 Manual Number 9017846
16
To Next Page
Loading...