Midcontinent SAM MD302 - Pre-Flight Mode

REV. F Sept 15, 2015 Manual Number 9017846
2
In Pre-ight Mode, power is applied to the unit and the Introduction
Screen appears during startup (Image 1).
During Pre-ight Mode, the Introduction Screen will be displayed
while the unit conducts an initial Power-up Built-in Test (PBIT) of
the system to validate operational readiness. This includes, among
others, a battery capacity measurement, an internal test to verify
software and memory, and conrmation that the internal settings
and identication of the unit match the Conguration Module
installed in the aircraft cable harness.
The Introduction Screen will be displayed for approximately ve
seconds and will transition to Flight Mode when complete.
PRE-FLIGHT MODE
PRE-FLIGHT MODE
INTRODUCTION SCREEN
Image 1