Midea MDD160-V052/F01-US1305

Service manual for Dryer Machine Midea America Company
-------------------------------------------------------------------------------------------------------------------------------------------------------
－ 35 －
NOTE:
Before proceeding, you
must first determine
which gas valve style is
on the unit.
If the gas dryers has
style “A”, follow step
7(h) .For style “B” follow
step 7(i).
STYLE”A”
STYLE”B”
STYLE A GAS VALVE
CONVERSION
7(h).1 Remove the
regulator vent cap from the
pressure regulator.
7(h).2 Install the new
blocking pin finger-tight. Do
not tighten more than 1/8
turn to seal it.
7(h).3 Affix the “Rating
Plate Conversion Label”
in a conspicuous location
adjacent to the rating
plate.
Regulator
Vent cap
Cover dial
Orifice
Orifice
①
②
③
Remove
Add
Blocking Pin
Cap