-------------------------------------------------------------------------------------------------------------------------------------------------------
7(i).1 Disconnect the 2
connectors from the valve.
7(i).2 Position a pair of long
nose pliers into the slots of
the cover dial. Rotate cover
dial 25 degrees counter
clockwise lining up ”LPG”
marking with the indicator
on the gas valve.
7(i).3 Observe the cover
dial settings indicated as
NG(Natural gas) and
LPG(Liquefied Propane
gas) along with the gas
type indicator.
7(i).4 Affix the “Rating
Plate Conversion Label”
in a conspicuous location
adjacent to the rating
plate.
To Next Page
Loading...
