15
p
ower ranges.
i
nduction hobs are able to limit themselves automatically in order to work at lower power level, to
av
oid the risk of overloading.
To enter Power Management Function
T
urn on the hob, then Press at the same time the
“
+” (timer) and key lock.
T
he timer indicator will show “
P5
“ which means
power level 5。The default mode is on 7.0Kw。
T
o switch to another level
press +/- from the timer
or
There are 5 power levels, from “P1” to “p5”. The
timer indicator will show one of them.
“P1” : the maximum power is 2.5kW.
“P2” : the maximum power is 3.5kW.
“P3” : the maximum power is 4.5kW.
“P4” : the maximum power is 5.5kW.
“P5” : the maximum power is 7.0kW.
Confirmation and Exit Power Management Function
Press at the same time + (timer) and key lock for
confirmation.
Then the hob will be turned off.
3.
3.8 Timer control
You can use the timer in two different ways:
a) You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the
set time is up.
b) You can set it to turn one or more cooking zones off after the set time is up.
The timer of maximum is 99 min.
a) Using the Timer as a Minute Minder
If you are not selecting any cooking zone
To Next Page
Loading...
