Midea MTA-76C(H)RN1 - Page 136

Midea R410A T3 Top-discharge Split Type Series 50Hz MCAC-UTSM-201501
135
Step2: The value of the first code ‘X’ is ‘0’, press the temperature setting buttons and
to adjust the second code value.
Step3: After setting the second code value, press Quiet/OK button to switch the first
code to the next value.
Step4: When the first code value is ‘6’, press Quiet/OK button again to exit the
parameters setting.
The parameter setting table
First
code
Function
Second code
0
1
2
3
4
0
Cooling-only/Heat pump
selection
Heat pump (Default)
Coolin
g only
\
\
\
1
Indoor unit communication
address setting
Yes (Default)
None
\
\
\
2
Power-off memory
Yes (Default)
None
\
\
\
3
Filter cleaning reminding
Cancel the reminding
function
1250
hours
2500
hours
5000
hours
10000
hours
5
Remote receiving function
Yes (Default)
None
\
\
\
6
Centigrade/Fahrenheit
display
Centigrade (Default)
Fahre
nheit
\
\
\
Notes: The second code of the filter cleaning reminding is 2500hours, which as default.