Use guide for vibration mop assembly
Water inlet/outlet
2. Remove the rubber plug, and fill the
tank with water to the MAX line;
Cautions
1. Fill the tank with municipal water
instead of purified water;
2. Do not add washing powder, laundry
detergent, cleaning agents, disinfectants,
hand sanitizers, unknown oily liquids,
and alkaline substances;
4. Do not fill the tank with hot water to prevent
its distortion at high temperature;
3. Do not use the mopping function
on floor carpets;
6. The mopping water volume can be
adjusted in the App.
5. Keep the terminal dry and clean
before pushing in the vibration
mopping assembly.
Special rag for vibration mopping
Terminal
Water speed
Adhere the special rag for vibration mopping
to the bottom of the vibration mopping assembly
by aligning it along the middle seam, and you
can clean/replace it by simply peeling it off;
4. Push the vibration
mopping assembly in
the main unit until a
"click" sound is heard;
Mop Cloth Holder
Mop Cloth
Attach mopping holder to the
water tank.
1. Press the button on tank
and pull to remove.
Water Tank
9
To Next Page
Loading...
Need help?
General
