Cleaning of wheels (weekly cleaning recommended)
1. Turn the drive wheels forward and
backwards to remove foreign matters
from them. Clean them with the cleaning
tool or soft cloth and remove hair or
foreign matters.
3. Wash the roller brush with water and dry it;
End cover
2. Clean the roller brush and its cover
with a cleaning brush or soft cloth;
4. After completion of the cleaning, push the end
cover back to the brush body;
5. Install the brush body in the brush chamber in the
direction as illustrated;
6. Push and snap the roller brush cover to the robot.
19
To Next Page
Loading...
Need help?
General
