Status indicators of the dust collector stationStatus indicators of the main unit
Indications SolutionsStatus
/
/
/
/
/
Indications SolutionsStatus
/
/
See Troubleshooting
(Page 11) for fault solutions
/
/
/
/
/
/
/
/
/
/
Standby indicator is
continuously on
Standby indicator is off
Standby indicator flashes
quickly
Standby indicator flashes
slowly
Return-to-charge indicator
is continuously on
Return-to-charge indicator
flashes
Return-to-charge indicator
is off
WiFi indicator is off
WiFi indicator flashes
slowly
Wi-Fiindicator flashes
quickly
WiFi indicator is
continuously on
Electrolytic water indicator
is on
Electrolytic water indicator
is off
Robot is standby, cleaning, and
return-to-charge after completion of
cleaning
Sleep/shutdown
Robot is faulty
Robot is charging
Robot is return-to-charge after completion
of cleaning
Robot is return-to-charge due to low
battery level
Robot is standby/cleaning/charging
Robot is not network paired or
disconnected from the network
Robot is waiting for network pairing
Robot is networking
Robot shows normal connection with the
network
Electrolytic water module is operating
Electrolytic water module does not start
Off
White indicator is
continuously on
Red indicator is
continuously on
Red indicator
flashes
Dust collector station is not powered
Dust collector station is standby
Dust collector station has been powered for a
while
Robot returns to the dust collector station,
starting to collect dust automatically
Dust collector station is collecting dust
Dust bag is full
Dust bag is not installed in place or dust collector
station is not tightly covered with its top cover
Please replace it with a new
dust bag
Install the dust bag and close
the top cover tightly
13
To Next Page
Loading...
Need help?
General
