Daily maintenance and service
Dust-box release key
1. Remove the dust box:
Pinch the dust box with your two
fingers, and press the dust box
release key with another hand
to remove the box.
2. Dust removal: open the dust box,
and remove dust from the box;
Filter assembly
3. Remove the filter assembly according to
text prompts on the filter assembly;
Maintenance of dust box (cleanup as required)
5. Clean dust from the dust collection port of the dust box.
Dust box Filter cotton
Filter assembly
Dry in the air
4. Clean the
dust box, filter
assembly, and filter
cotton; after cleaning and
drying completely, re-install
them, and close the rear cover,
check whether it is installed in
place;
(Both of the dust box and the filter
assembly can be washed with wate)
16
To Next Page
Loading...
Need help?
General
