Faults solution for main unit and its App
Main unit will not charge The main unit does not
get contact with
charging chips
Place the main 1m in front
of the dust collector
station, and press the
return-to-charge key
Main unit will not
return to charge
The dust collector station
is positioned improperly
See Page 8 in the manual
Clean up the scattered wires
and other sundries on the floor
Main unit stuck-1
The main unit is
entangled and stuck
by sundries on the
floor, such as wires
1m
Solutions
Fault
description
Possible
causes
23
To Next Page
Loading...
Need help?
General
