5. Dry the vibration mopping assembly
and the special rag for vibration mopping;
Maintenance of vibration mopping assembly (weekly cleaning recommended)
4. Clean the rag;
Water inlet/outlet
5g
3. Pull off the water inlet/outlet plug from the
tank to drain all water in the tank; wipe
the tank surface with a piece of clean rag,
not cleaning the vibration tank with water;
6. Clean up water scales regularly according
to operating instructions. Fill the tank with
water to the MAX line, add 5g citric acid to
soak for 30 minutes, then pour out the
water and clean again with new water.
Repeat the above cleaning procedures for
heavy scales. During the cleaning, do not
energize the tank.
1. Press the button on tank and pull to remove.
Once finished mopping,presee the water tank release
button the water tank.Detach the mop holder by
pulling them apart.
Water Tank
Mop Cloth Holder
Mop Cloth
For vibration tank, please note that the
pad cannot be removed, just remove
mop cloth, and wash it for next use.
17