Cleaning front cover of roller brush
Note:
1. If any residual stains are found on the spout, wipe with a damp rag and do not rinse with water.
2. It is recommended to clean and dry the roller brush cover and brush after each use to keep it clean
and tidy.
1. Press the buckle as shown in the figure and
remove the front cover of the roller brush.
3 a. After self-cleaning, if there is any entanglement such as hair on the roller brush, clear with scissors
or a blade.
b. For heavy dirt cleaning (such as ketchup, soy sauce, etc.), if there are still dirt residues on the roller
brush after self-cleaning, perform self-clean again, or take out the roller brush and rinse it with water.
4. After self-cleaning, if the front cover of the roller brush is found to have stains and residues, rinse it
with clean water, and place it in a ventilated place to dry thoroughly.
2. Pull up the handle on the left end of the roller
brush and remove the roller brush, and then place it
in a cool and dry place to keep it dry and avoid
unpleasant odors.
Clean Air dry
Pull up
To Next Page
Loading...
