16
Press or ▲, ▼ to adjust the timer settings;
Once the adjustment is done, the timer information is sent to the indoor unit.
Press or ▲, ▼ to adjust the timer settings;
Once the adjustment is done, the timer information is sent to the indoor unit.
2) Timer Off Operation:
Press (see Figure 3.18), and the remote controller will display "Timer Off", and "0.0h Later Off" will appear in
timer area. Adjust the Timer Off settings now;
Note:
• Long press the timer adjustment buttons to adjust the time in units of 0.5 hours. If the adjustment exceeds 10 hours,
the changes will be in units of 1 hour, and the maximum time setting is 24 hours.
• Adjust the Timer On or Timer Off to 0.0h to cancel the Timer On or Timer Off settings.
Figure 3.18
Operating the Remote Controller
• When the Timer settings have been completed, there may be a ±15 minutes time difference when the buttons for
adjustment, mode, fan speed and ECO are pressed again.
• The Timer On and Timer Off settings can be set at the same time.
Once the buttons on the remote controllers are locked, all the other button operations except for Unlock and IDU
Address Setting are invalid.
1) Press and at the same time to lock the button (see Figure 3.19), and the screen will display the lock icon
;
2) Press and at the same time, and the lock icon will disappear. Button is unlocked.
5.11 Button Lock Operations
Figure 3.19
To Next Page
Loading...
Need help?
General
