1
Installation
1. Installation Precautions
Meaning of Caution Symbols
Precautions in handling remote controller
• Direct the transmitting part of the remote controller to the receiving part of the air
conditioner.
• If something blocks the transmitting and receiving path of the indoor unit and the
remote controller as curtains, it will not operate.
Installation site
• It is possible that signals will not be received in rooms that have electronic
uorescent lighting. Please consult with the salesman before buying new
uorescent lights.
• If the remote controller operated some other electrical apparatus, move that
machine away or consult your dealer.
• Transmitting distance is approximately 7 m.
• 1 short beeps from the receiver indicates that the transmission is properly done.
• Do not drop or get it wet.
It may get damaged.
• Never press the button of the remote controller with a hard, pointed object.
The remote controller may get damaged.
WARNING
Safety considerations
Please read this "Safety considerations" carefully before installing Controller and be sure to install it correctly. After
completing the installation, make sure the controller operates properly.
Please instruct the customer how to operate the controller and how to perform maintenance.
Information classied as
NOTE
contains instructions to ensure proper use of the controller.
Failure to observe these instructions properly may result in property damage or personal injury.
• Ensure that nothing interrupts operation of the wireless remote controller.
• Ensure that the signal from the remote controller can easily be transmitted.
• Ensure that the operation display lamp and other indicator lamps can easily be seen.
• Ensure that there is neither a source of light nor a uorescent lamp near the receiver.
• Ensure that the receiver is not exposed to direct sunlight.
To Next Page
Loading...
Need help?
General
