Removal and replacement
1. Take out sump assembly. (see sump assembly removal
and installation)
2. Remove all screws for fixing sump pump assembly.
3. Replace a new motor pump assembly.
4. Reverse the above procedure to install. And check out all connectors connects well.
Removal and replacement
1. Take out sump assembly. (see sump assembly
removal and installation)
2. Remove all screws for fixing heater elements
assembly. Take out heater elements assembly and
heater elements support assembly.
3. Remove all nuts for fixing heater elements assembly. Then take out two gaskets of heater elements
assembly.
Heater elements assembly
Motor pump assembly
Screws
Screws
To Next Page
Loading...
