Midea WQP6-3607 - Earthing Instructions

6
or higher. After service is completed, be sure all safety grounding circuits are complete,
all electrical connections are secure, and all access panels are in place.
The main control board controls all electrical elements in the dishwasher machine. It located in
the protecting box in the bottom of dishwasher machine. And it easy is replaced when it cannot
work.
Removal and Replacement
1. Disconnect power supply.
2. Take off cutlery basket, basket and filter system.
3. Turn the dishwasher machine. And unfix all snaps for fixing cover of bottom board
.
Part Name:
1
cover
of
bottom boa
rd
4. Pull out all housings and terminals (including some locking terminals), then unfix all snaps
for fixing main control board.
Part name: 1 protecting box 2 main control board
Note: mark all housings and terminals positions and colors before pulling out them.
Note: some terminals are locking terminals.
5. Reverse the above procedure to install. And check out all connectors connects well.
M
ai
n
c
o
nt
r
o
l
bo
a
rd
1
1
2
snap
s
PDF Pro Evaluation