Model GXT1000/1050/1191/1030 Series
Page 12
www.midlandusa.com
NOAA WEATHER RADIO/SCAN
Your radio has a NOAA WEATHER RADIO function, to enable the
user to receive weather reports from designated NOAA stations.
Your radio also has a NOAA WEATHER SCAN function, to enable
the user to scan all 10 channels of the NOAA WEATHER RADIO.
To turn the NOAA WEATHER SCAN on, press and hold the MENU
button for 5 seconds while in GMRS mode. The radio will go to WX
Band mode and start scanning all 10 channels and stop on any active
channel. When the channel becomes inactive for 10 seconds the
radio will resume scanning.
To stop the NOAA WEATHER (WX) SCAN and set the channel
manually on the WX Band, press the MENU button during NOAA
WEATHER (WX) SCAN. The radio will stop scanning and the display
will show the current WX Band channel setting and the icon. While
in WX Band mode press the
s
\
t
buttons to select one of the 10
NOAA WEATHER (WX) BAND channels. To confirm, press the PTT
button or press the MENU button to move to the next feature setting.
To turn the NOAA WEATHER RADIO off, press the PTT button. The
current GMRS/FRS radio setting will be displayed and the icon will
go off.
NOAA WEATHER ALERT
Your radio has a NOAA WEATHER ALERT function, to enable you to
automatically receive weather alerts from designated NOAA stations.
The NOAA WEATHER (WX) ALERT is automatically on during
NOAA WEATHER SCAN mode.
To turn the NOAA WEATHER (WX) ALERT on during normal NOAA
WEATHER RADIO mode, press the MENU button twice while in
NOAA WEATHER SCAN mode. The display shows "AL," while on
the right an "oF" icon appears blinking. Select "on" by pressing the
s
\
t
buttons. To confirm, press the PTT button or press MENU. The
radio will return to WX BAND and the icon will continue blinking.
If the radio receives a WX ALERT signal from a designated NOAA
station while in GMRS/FRS Radio mode, the radio will beep for 10
seconds while an "AL" and "In" icon appear on the display, after
which it will automatically go to WX BAND.
If any button is pressed while beeping in GMRS/FRS Radio mode,
the radio will automatically go to WX BAND.
To Next Page
Loading...
Need help?
General
