Midland MICRO MOBILE MXT500 - Transmitting and Receiving Calls; How to Transmit a Call; How to Receive a Call; Adjusting Volume During Calls

Page 15
midlandusa.com
Model MXT500
TRANSMITTING AND RECEIVING A CALL
IMPORTANT! To communicate between two MXT500 radios or any GMRS
radio, both radios must be set to the same channel and privacy code (see
Selecting a Privacy Code) selections..
1. To transmit a call, press and hold the PTT button on the microphone,
and speak into the microphone in a normal voice.
• The bottom LED will illuminate red while your radio is transmitting.
• The signal strength indicator on the LCD will display the transmit
signal strength.
2. To receive a call, release the PTT button on the microphone.
• The BUSY icon will show on the LCD display when your radio is
receiving a transmission.
• The TX/RX indicator will illuminate green when your radio is receiving.
• The signal strength indicator on the LCD will display the signal
strength.
3. If necessary, rotate the POWER AND VOLUME KNOB to increase or
decrease radio volume.
NOTE: For maximum clarity, hold the microphone 2 to 3 inches from your
mouth when speaking.
Jl1DLAND® ____________ _