Midland MICRO MOBILE MXT500 - Call Alert; Menu Functions

Page 18
midlandusa.com
Model MXT500
• A period will appear after the CH icon on the LCD noting that the
channel is active in the “auto-scan” list.
NOTE: The radio comes standard with all channels enabled for
“auto-scan”.
CALL ALERT
<RXUUDGLRFDQWUDQVPLWDFDOODOHUWIRUD¿[HGOHQJWKRIWLPH
IMPORTANT! To communicate between two MXT500 radios or any GMRS
radio, both radios must be set to the same channel and Privacy Code (see
selecting a privacy code) selections.
1. To send a call alert, press and hold the PTT button. While pressing and
holding the PTT button, press the UP button on the microphone. The call
tone will transmit.
• The bottom LED will illuminate red while your radio is transmitting the
call alert.
• The signal strength indicator on the LCD will display the call alert
signal strength.
2. To disable the call alert, press the PTT.
MENU FUNCTIONS
0HQXIXQFWLRQVOHW\RXFRQ¿JXUHVHYHUDORSHUDWLRQDOSDUDPHWHUVRIWKH
MXT500 to suit your personal preferences.
NOTE: All menu functions are automatically saved after making selection.
The menu will timeout after 10 seconds on inactivity or can be closed by
pressing the menu button.
~I OLAN r::/ ____________ _