INilfl·•·;Mf§Qbll@ll
~~IDLAND
Programming
the
radio
for
your
area:
Your WR-120 All Hazards Weather
Alert
Radio comes preprogrammed
to receive weather and hazard
alert
transmissions for
all
S.A.M.E. codes
within range
of
the transmitter
of
the selected channel. Follow these
simple
instructions
to
program your radio to receive
alerts
just
for your county.
"Single"
County (S.A.M.E.) Code:
1.
Press
MENU
to open menu options.
2.
Press
_.
to
scroll
through menu to
SET LOCATION,
then press
SELECT.
3.
Press
_.
to
SINGLE
then press
SELECT.
4.
01
EMPTY
will
be
displayed.
Press
SELECT.
5.
Press
_. or
T
to
select
the desired country then press
SELECT.
6.
Press
_. or
T
to
select
the desired state/province then press
SELECT.
7.
Press
_. or
T
to
select
the desired
location
then press
SELECT.
8.
Press
MENU
to exit menu mode.
"Multiple"
County Code:
For
multiple
counties,
follow
the above instructions. At step
3,
press
_.
until
MULTIPLE
is
displayed.
The
"NEARBY"
counties will come up
automatically to make
selection
easy.
You
can
program up to
25
different
location
codes.
Note:
To
manually enter a
FIPS
code, press
~
while
# #
LOCATION
is
displayed. However,
selecting
a
NEARBY
will
be
unavailable.
NEARBY
locations
are based on weather transmitter
coverage area, not geographical location.
Set Alert
Type (Display, Voice or Tone):
1.
Press
MENU
to open menu options.
2.
Press
_.
to
scroll
through menu to
ALERT TYPE,
then press
SELECT.
3.
Press
_.
to choose
VOICE,
TONE
or
DISPLAY
then press
SELECT.
4.
Press
MENU
to exit menu mode.
Alert Type Description
When
the
DISPLAY
alert
type
is
chosen,
on
I~
a
Display
text
alert
will
scroll
on
the
display.
There
wi
I
be
no
audible
alarm.
Voice
When
the
VOICE
alert
type
is
chosen,
the
alert
tone
will
sound
for
8
seconds,
then
you
will
hear
the
voice
of
the
weather
broadcast
for
3
minutes.
When
the
TONE
alert
type
is
chosen,
the
alert
Tone
tone
will
sound
for
3
minutes,
or
until
you
press
any
button.
To Next Page
Loading...
Need help?
General
