Midtronics DSS-7000

Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527
www.midtronics.com
31
Chapter 6: SettingsDSS-7000
Auto Brightness
Enable and disable Auto Brightness by taping on the check box.
Auto Brightness
Sleep Time
Adjust the amount of elapsed time before the Tablet Controller
goes into a power saving (Sleep) mode. The default is 5
minutes.
2 minutes 
3 minutes
4 minutes
5 minutes
Dim Time
Adjust the amount of elapsed time before the Tablet Controller
goes into a power saving (Dim) mode. The default is 1 minute.
30 seconds 
1 minute
Sounds
Enable and adjust the System Volume, touch screen sounds,
and notication sounds. The Notication Sound can also
changed.
System Volume
Adjust the System Volume by tapping and holding the slider,
then slide it left or right to make the screen brighter or darker.
Low High
Touch Sounds Enabled
Enable and disable screen Touch Sounds by taping on the
check box.
Touch Sounds Enabled
Notication Sounds Enabled
Enable and disable Notication Sounds by taping on the check
box.
Notication Sounds Enabled
Notication Sounds
Select a default Notication Sound.
Pixie Dust 
Bells
Chime
BMIS Login (Admin Only)
Enter and edit BMIS Login and Password information. Log into
a BMIS account.
Login
Zone3@yourshop.com
Password
• • • • • •
Shop Information (Admin Only)
Use the onscreen keypad to enter the store name, address, and
phone number.
Store Name
Your Shop Name
Street Address
1000 Any Street
Street Address 2
#104
City
Your Town
State
Your State
Zipcode
Your Postal Code
Phone #
Your Phone Number
Shop Preferences (Admin Only)
Set time, date, and battery test parameter defaults.
Select Time Format
12 Hour 
24 Hour 
Select Date Format
06/19/2014 
19/06/2014 
2014/06/19 
Select Time Zone
Multiple Time Zones

Set Date
Set Date

Set Time
Set Time

Default Battery Ratting
CCA 
Temperature Units
˚F 
˚C 
Decimal Separator
00.00 
00,00 