Portion size
50
The flavour of the coffee produced
depends not only on the type of coffee,
but also on the amount of water used.
You can programme the amount of
water for all coffee drinks and hot water
to suit the size of your cups and the
type of coffee you are using. This does
not alter the amount of coffee used.
For coffee drinks with milk you can also
set the amount of milk or milk froth to
suit your personal taste. Additionally,
you can set the portion sizes for hot
milk and milk froth alone.
The changed portion size is always
saved in the current profile. The name
of the current profile is shown in the
top left of the display.
If the water container becomes empty
during the preparation of a drink, the
programming of the portion size will
be cancelled. The portion size will not
be saved.
The Drinks menu is shown in the display.
Place the cup you want under the
central spout or hot water spout.
Select Process.
Touch Change drink.
Select the drink and then
touchPortion size.
If you have selected a drink with milk
or tea, portion programming will start
immediately. Portion size does not need
to be opened separately.
The drink will be made and Save will
appear in the display as soon as the
minimum dispensing amount is
reached.
When the cup is filled up to the level
you want, touch Save.
If the maximum amount is reached,
preparation stops and the maximum
possible amount is saved.
If you want to change the portion size
for coffee drinks made with milk or hot
water, the ingredients (components)
which make up the drink will be saved
one after the other while the drink is
being made.
The programmed combination of
ingredients and portion sizes will now
be dispensed every time that particular
drink is selected.
To Next Page
Loading...
