Miele CM 7750 - Rinsing the Milk Pipework; Cleaning the Milk Pipework

Cleaning and care
83
Rinsing the milk pipework
Milk residues can block the milk
pipework. The milk pipework should
therefore be rinsed regularly. If a drink
has been made using milk, the prompt
to insert the end of the milk tube into
the drip tray will appear at the latest
when you switch the machine off.
You can also rinse the milk pipework
manually.
The Drinks menu is shown in the display.
Useful tip: Place a suitable cup or
glass underneath the central spout.
 Touch .
 Select Maintenance and then Rinse the
milk pipework.
 Place the end of the milk tube into
the aperture in the drip tray cover.
 Confirm withOK.
The milk pipework will now be rinsed.
Cleaning the milk pipework
For optimal cleaning results, we
recommend the Miele Cleaning agent
for milk pipework. The Cleaning agent
for milk pipework has been specially
developed for use with Miele coffee
machines and prevents subsequent
damage.
It is available to order from the Miele
online shop or directly from Miele (see
the end of this booklet for contact
details).
The Clean the milk pipework maintenance
programme lasts for approx.
10minutes.
The Drinks menu is shown in the display.
 Touch .
The cleaning process cannot be
cancelled. It must be completed
through to the end.
 Select Maintenance and then Clean the
milk pipework.
The process will start.
 Follow the instructions in the display.
Insert milk pipe in cleaning agent will
appear in the display.
Making a cleaning solution:
 Dissolve the cleaning agent in a
container with 200ml of lukewarm
water. Stir the solution with a spoon
until the powder has fully dissolved.