Problem solving guide
75
Problem Possible cause and remedy
The waste container is
overflowing even
though the drip tray and
grounds container have
been emptied following
each reminder.
The drip tray has probably been removed without the
waste container being emptied.
Removing the drip tray resets the internal counter for
emptying the waste container.
Always empty the waste container if you remove
the drip tray.
Certain types of beans produce a lot of coffee when
they are ground, meaning that larger coffee pucks
are pressed.
Adjust the quantity of coffee and grinder setting if
necessary.
Empty the waste container more often than
indicated in the display.
Fill the bean container
appears in the display
even though the bean
container has just been
filled.
This is not a fault.
Confirm the message with OK.
Insufficient coffee beans are getting into the grinder.
Have you used a dark roast?
This type of coffee bean is often oily. These oils can
cling to the inside of the coffee bean container and
hinder the flow of beans.
Make a coffee and observe whether the coffee
beans drop into the coffee bean container.
Clean the coffee bean container more often if you
are using darker, oilier coffee beans.
Try other types of coffee beans which are less oily.
The coffee machine
does not rinse itself
when turned on.
This is not a fault.
If the coffee machine is already at operating
temperature, rinsing will not take place.
To Next Page
Loading...
Need help?
General
