Problem solving guide
76
Problem Possible cause and remedy
Coffee dispensing is
repeatedly interrupted
and the message Fill the
bean container appears in
the display.
This is not a fault.
The brew unit has not detected the ground coffee.
Certain types of coffee produce a small quantity of
coffee grounds. Usually the grinder is set too fine and
the amount is set to minimum.
Confirm the message with OK.
If the coffee is too strong for you or tastes bitter, try a
different type of coffee beans.
If the display appears with all types of coffee:
Set the grinder to a coarser setting (see "Grinder
setting").
Select a larger amount of coffee.
Don't forget to check any drinks changed in "User
profiles".
If the message only appears when dispensing certain
drinks:
Check the amount of coffee set for this drink (see
"Amount of coffee"). Select a larger amount of
coffee.
You may also need to set a coarser grinder setting.
The descaling
programme was started
by mistake.
The descaling programme cannot be stopped once
the OK sensor has been touched.
Descaling must be continued through to completion.
This is a safety precaution to make sure the machine
is descaled correctly. This is important for the
longevity and functional efficiency of your coffee
machine.
Descale the coffee machine.
To Next Page
Loading...
Need help?
General
