To ensure that the flavour can develop
fully and be maintained for longer the
machine has an additional function to
automatically rinse and pre-warm the
system. The same function is used to
clean the system and the coffee spouts
after use.
Hot water from the hot water spout can
be used to pre-warm the cups.
The machine can be programmed to
switch to standby mode so it is always
ready for operation but does not
consume unnecessary electricity. This
can be programmed to happen
between 15 minutes and 3 hours after
coffee was last dispensed.
To save time when preparing coffee for
a number of people, the pre-grind
function can be selected, so there is
always a portion of coffee ready.
Brief description
12
To Next Page
Loading...
