Milk frother
Always clean the steam spout immediately after use,
as it is harder to clean once milk has dried on.
^
Loosen the upper locking ring a and pull the
steam spout cover downwards b.
^
Clean the cover with a mild solution of hot water
and washing up liquid or in the dishwasher, then
dry it. Make sure the steam jets are thoroughly
cleaned, especially the very small hole at the top
of the cover as this one is important for the correct
functioning of the spout.
^ Push the cover back into position on the steam
spout e a and tighten the locking ring b.
Cleaning and care
56
To Next Page
Loading...
