Installation
Ensure power is not supplied to the machine
while installation work is being carried out. The
same applies should the machine ever be taken
out of the housing unit.
The coffee machine must be built in to be
operated.
^
Connect the machine to the electricity supply.
^
Push it all the way back into the niche, until there
is a resistance.
^
Open the front of the machine and partially tighten
the screws.
^
Carefully turn the lower screws a to centre the
machine in the niche.
^
Adjust the upper screws b by hand to fix the
machine into the unit.
Installation
74
To Next Page
Loading...
