Hot water
When it is switched on, the machine will dispense
hot water at any time for tea or other drinks.
^
Turn the selector clockwise to the In Operation
position (with or without lighting).
If the selector is already in this position with the
message "Standby. . . " shown in the display, the
machine is in energy-saving mode. Press ENTER to
switch it into operation.
The following will appear in the display:
Wait until the following appears in the display:
^ Place a suitable container (e.g. a tea cup) under
the hot water spout.
^
Press the hot water button d.
Hot water will be dispensed from the hot water
spout.
^
As soon as the container is full, press the hot
water button d again.
The machine will stop automatically if a
volume has been programmed in for hot
water and function "Prog. hot water" is
switched on.
Making coffee
41
To Next Page
Loading...
