^
Place a large container (approximately 1 litre)
under the steam spout and turn the steam control
dial anti-clockwise.
The descaling process will commence automatically.
The following will appear in the display:
During the descaling programme do not open the
front of the machine or turn the selector to "0".
This would interrupt the descaling process. It will
resume when the front is closed again or the
selector is turned to another position. However
the water container will need to be refilled.
If a smaller container is used, don't
forget to empty it at intervals.
The pump will introduce a small quantity of
descaling agent into the system, then stop for a
while to let the solution take effect. The whole
procedure takes approx. 90 minutes.
When the programme is finished, the following will
appear in the display:
^
Turn the steam control dial clockwise to the o
position.
^
Press ENTER.
Descaling
59
To Next Page
Loading...
