Miele DG 1050 - After descaling

An audible tone will sound and the p
symbol will start flashing ten minutes
before the end of the descaling
process. The water container needs to
be filled with fresh water.
^
Remove the water container and
empty it. Remove the insert.
^
Rinse the water container and the
insert thoroughly.
^ Replace the insert and fill the water
container with 1 litre of water. Push
the water container into the appliance
until it connects.
^ Now press the function selector to
continue the descaling process.
After descaling:
An audible tone will sound when the
descaling process has been
completed.
^
Open the door.
^
Remove the water container and
empty it.
^
Switch the appliance off, and then
dry it thoroughly.
Cleaning and care
38