Features
22
Inserting the FlexiClip telescopic
runners
ɘ Danger of burns! Make sure the
heating elements are turned off and
that the oven cavity is cool.
Each shelf level is made up of two rails.
The FlexiClip telescopic runners fit on
the top rail.
Insert the FlexiClip runner with the
Miele logo on the right-hand side.
Do not extend the FlexiClip runners
when inserting or removing them. If
the FlexiClip runners are difficult to
remove after inserting, you may need
to use some force to release them.
ĺ Hook the FlexiClip runner onto the
front of the top rail of a side runner
(1.) and then hold it at an angle in
towards the middle of the oven
compartment (2.).
ĺ Slide the FlexiClip runner in at an
angle along the top rail as far as it will
go.
ĺ Then swing it back to the side of the
oven cavity and secure it to the top
rail with an audible click.
To Next Page
Loading...
Need help?
General
