Clock / Timer
35
Setting a time or a duration
The hours and minutes are set
individually:
– for the time of day and cooking
durations, first the hours and then the
minutes.
– for the kitchen timer, first the minutes
and then the seconds.
ĺ Confirm with OK.
Depending on the position of the mode
selector ʀ, ʒ, ʑ or Ɂ will appear.
ĺ Highlight the required function using
Ҵ or ҵ.
The corresponding symbol flashes for
approx. 15 seconds.
ĺ Confirm with OK.
The function is selected and the left
numeric block will flash.
The time/duration can only be set
while the block is flashing. If the
flashin
g stops you will need to select
the function again.
ĺ Set the required value using Ҵ or ҵ.
ĺ Confirm with OK.
The right numeric block will start to
flash.
ĺ Set the required value using Ҵ or ҵ.
ĺ Confirm with OK.
The time/duration set is now saved.
Displaying the time / duration
If you have set times the ʀ and ʒ or
ʑ symbols will appear.
If you are using the kitchen timer ʀ,
cooking duration ʒ and end of cooking
time ʑ functions simultaneously the
last selected time will be displayed.
If you have selected a cooking duration,
the time of day cannot be displayed.
When the time/duration has elapsed
– the corresponding symbol will flash
in the display,
– and a buzzer will sound, if selected
(see "Clock/Timer - Changing
settings").
ĺ Confirm with OK.
The buzzer will turn off and the symbols
in the display will go out.