Clock / Timer
44
Changing settings
The appliance is supplied with a
number of default settings (see the
"Settings overview" chart).
A setting ɠ can be changed by altering
its status ɣ.
ĺ Turn the mode selector to Off.
ĺ Press and hold Ҵ until ɠə appears.
ɠə
ĺ To change another setting press Ҵ or
ҵ until the relevant number appears.
ĺ Confirm with OK.
ɣɆ
The setting is selected and the current
status ɣ appears, e.g. Ɇ.
To change the status:
ĺ Press Ҵ or ҵ until the required status
appears in the display.
ĺ Confirm with OK.
The selected status is saved and the
setting ɠ appears again.
If you would like to change additional
settings, repeat the process.
If you have completed changing
settings:
ĺ Wait approx. 15 seconds until the
time of day appears.
The settings will remain in memory
even in the event of a power failure.
To Next Page
Loading...
Need help?
General
