Clock / Timer
43
Changing the time of day
The time of day can only be changed
when the mode selector is at Off.
ĺ Turn the mode selector to Off.
ĺ Press and hold ҵ until Ɂ starts
flashing.
ĺ Confirm with OK.
The hours will flash.
ĺ Use Ҵ or ҵ to set the hours.
ĺ Confirm with OK.
The hours are saved and the minutes
will flash.
ĺ Use Ҵ or ҵ to set the minutes.
ĺ Confirm with OK.
The time of day is now set.
After a power failure, the time of day
will need to be reset.