Miele H2261B - Runner and Panel Cleaning

Electrical connection
75
Data plate
The silver data plate is located along
the front side of the oven with the door
open (see "Guide to the oven").
ɘ Before connecting the appliance
to the power supply, make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
electrician if in doubt.
H2261B: Electrical connection
208 V
ɘ Do not connect the oven to a
240 V power supply.
The oven is equipped with a 6' 3"
(1.9 m) long flexible power cord with a
NEMA 14-30P plug, ready for
connection to a 120/208 V, 60 Hz, 20 A
power supply.
Maximum connected load: 3,600 W
H2261B: Electrical connection
240 V
The oven is equipped with a 6' 3"
(1.9 m) long flexible power cord with a
NEMA 14-30P plug, ready for
connection to a 120/240 V, 60 Hz, 20 A
power supply.
Maximum connected load: 3,800 W
H2260E: Electrical connection
208 V
ɘ Do not connect the oven to a
240 V power supply.
The oven is equipped with a 6' 3"
(1.9 m) long flexible power cord with a
NEMA 14-50P plug, ready for
connection to a 120/208 V, 60 Hz, 40 A
power supply.
Maximum connected load: 9,700 W, in
combination with Miele cooktop
KM6002.
H2260E: Electrical connection
240 V
The oven is equipped with a 6' 3"
(1.9 m) long flexible power cord with a
NEMA 14-50P plug, ready for
connection to a 120/240 V, 60 Hz, 40 A
power supply.
Maximum connected load: 9,900 W, in
combination with Miele cooktop
KM6002.
SAVE THESE INSTRUCTIONS FOR
THE ELECTRICAL INSPECTOR'S
USE.
NEMA 14-30P, L1, L2, N, G, 20 amp
208/240 VAC