Programme options
55
Start at
With the Start at function, you set the
exact time you want the programme to
start at.
Use the arrows to set the hour
and confirm with OK.
The hours will be saved and the minute
number block will be highlighted.
Use the arrows to set the
minutes and confirm with OK.
The display will change to show the
programme menu.
Close the door.
The left hand in-operation indicator light
will start flashing on and off.
When the set time is reached, the pro-
gramme selected will begin automatic-
ally.
Finish at
With the Finish at function, you set the
latest time at which you wish the pro-
gramme to end.
Use the arrows to set the hour
and confirm with OK.
The hours will be saved and the minute
number block will be highlighted.
Use the arrows to set the
minutes and confirm with OK.
The display will revert to the programme
menu and the estimated start time will
appear.
Close the door.
The left hand in-operation indicator light
will start flashing on and off.
A message will appear in the display if
the programme cannot be completed
by the set finish time because it has too
long a running time.
The selected programme will start auto-
matically when the estimated start time
is reached.
To Next Page
Loading...
Need help?
General
