Programme options
56
EcoStart
The EcoStart function allows you to take
advantage of time variable economy
rates of electricity. Before you can use
this option you must set up to three
electricity tariff time zones (see "Set-
tings, EcoStart").
You then set the latest time at which the
programme selected should end.
The dishwasher will start automatically
in the cheapest tariff zone within the
time set.
Use the arrows to set the hour
and confirm with OK.
The hours will be saved and the minute
number block will be highlighted.
Use the arrows to set the
minutes and confirm with OK.
The display will change to show the
programme menu.
Close the door.
The left hand in-operation indicator light
will start flashing on and off.
The selected programme will start auto-
matically during the most cost effective
time zone. It will finish at the latest by
the set finish time.
SmartStart
The SmartStartfunction is used for start-
ing your dishwasher automatically at a
time when your energy costs are most
economical.
If the SmartStart option has been activ-
ated in the Settings menu, SmartStart will
appear in the Delay start menu instead
of EcoStart (see "Settings, Miele@home,
SmartStart").
If your energy provider offers this ser-
vice, they will send a signal to your
dishwasher when energy costs are at
their most economical.
This signal will start the dishwasher.
You can set a time, by which the pro-
gramme has to have finished by. The
dishwasher will then calculate the latest
possible start time for the programme
selected and will wait until this start
time for the signal from the energy pro-
vider.
To Next Page
Loading...
Need help?
General
