Programme options
57
Set the time, by which the selected pro-
gramme has to be finished by.
Use the arrows to set the hour
and confirm with OK.
The hours will be saved and the minute
number block will be highlighted.
Use the arrows to set the
minutes and confirm with OK.
Waiting for SmartStart will appear in the
display.
Close the door.
The left hand in-operation indicator light
will start flashing on and off.
The selected programme will start auto-
matically, as soon as the energy pro-
vider has sent the signal, or the latest
calculated start time has been reached.
Changing or deleting set times
You can change the set times or the
programme before the start time in the
display is reached.
Open the door.
Press the button.
Select the function that you want to
change or delete the time for.
After confirming the Change option you
can change the set time.
After confirming the Delete option the
set time will be deleted and the in-
dicator light will go out.
You can now select and start a pro-
gramme.
To Next Page
Loading...
Need help?
General
