Problem solving guide
72
Problem Cause and remedy
All in-operation indicat-
ors are flashing quickly.
The warning buzzer is
sounding.
One of the following
faults is shown in the
display:
Before rectifying the problem:
Switch the dishwasher off with the button.
Fault auto. door closing The door might be obstructed by an item inside the
appliance.
If this is the case, remove the item causing an ob-
struction and switch the dishwasher on again.
If the same message appears again, call the Ser-
vice Department.
Fault auto. door opening There may be a technical fault.
Open the door manually (see "Opening the door,
Emergency door opener").
If the same message appears again, call the Ser-
vice Department.