~
If cleaning and rinsing results are
subject to particularly stringent
requirements (e.g. chemical analysis,
specialised industrial processes etc.), a
regular quality control test must be
carried out by the user to ensure that
the required standards of cleanliness
are being achieved.
~
Mobile units, modules and inserts
should only be used for the purpose
they are designed for.
~
Empty any containers or utensils
before arranging them in the machine.
~
Do not allow any remains of acids or
solvents, and in particular hydrochloric
acid or chloride solutions, to get into
the wash cabinet. Similarly avoid any
materials with a corrosive effect. The
presence in compounds of any solvents
should be minimal (especially those in
hazard class A1).
~
Please ensure that any water
drained into the public mains drainage
system complies with all local and
national water regulations. To prevent
pollution to the waterways please
ensure that accepted tolerance levels
are adhered to.
~
Do not process items in this
machine if they have, for example,
filings or metal shavings on them.
Depending on the type and shape of
filings, shavings etc. there is a risk of
them causing damage to the circulation
pump and also of causing contact
corrosion.
~
Ensure that solutions or steam
containing hydrochloric acid do not
come into contact with the steel outer
casing of the machine, to avoid any
corrosion damage.
~
After carrying out any work on the
mains water system, the water supply
system to the machine must be vented.
Otherwise, components of the machine
may become damaged.
~
Please follow the advice on
installation in these instructions and the
separate Installation Instructions.
Warning and Safety instructions
12
To Next Page
Loading...
