Switching on
^
Open the stopcocks (if turned off).
^
Press the I-0 button.
In operating levels A, B and D the most
recently selected PROGRAMME NAME
appears in the display and in operating
level C, AUTOMATIC MOBILE UNIT
RECOGNITION is displayed.
Changing the operating level
There are four operating levels
available on this machine:
A = Fixed and free access
programmes
B = Free programme selection
C = AWK – Automatic mobile unit
recognition (programme selection
via mobile unit coding) - optional
D = Programming / free programme
selection / change code
(see Programming manual)
^
Press 1 and 2 at the same time.
Operating levelsABCDareshown
in the display.
^
Select the operating level you want
using the 1 or 2 button.
^
Press 6 to confirm selection.
^
Enter code when requested by the
display.
The code is set ex-works to ü0000<.
To enter the code:
– Press the start button 6,
[0000] will appear
– Enter numbers using the 4 and
3 buttons
– Select number position with the
1 or 2 button
– To confirm the code press 6.
If you enter the wrong code:
FALSE CODE, ENTER AGAIN will
appear in the display
^
Close the door.
Selecting or changing your own
code See "System functions" in the
Programming Manual:
Code 1 for levels ABC
Code 2 for levels ABCD
Starting a programme
A. Fixed and free access
programmes
Programmes which you want to have
accessible in operating level A need to
be given free-access under operating
level D. See the programming manual
for details on how to do this.
^
Select operating level A.
^
Check in the display that the
programme shown is the one
required.
^
If several programmes have been
made freely accessible, select the
one required using the programme
selector.
^
Press the Start button 6.
Operation
37
To Next Page
Loading...
