Glass cleaning
Technical and optical glassware can be
processed in this machine to remove
grease, dust and lapping abrasives
and to ensure a residue free final rinse.
A residue-free final result will depend
on the quality of the water used.
Technical advice should be sought
regarding the processing of very
sensitive glassware and fine grade
lapping abrasives.
Process 1 and 2 (see "Description of
the machine - Water recovery") are
frequently used for glassware cleaning
(0.5-1.0% cleaning agent at 60-80 °C).
If the rinse water is to be re-used a
buffer or recycling tank is required.
Baskets and inserts
Small glass lenses can be cleaned in
the machine using baskets O 188/U
874 and inserts E 402/403. For larger
glass lenses inserts E 118 and E 136
should be used. Small lenses can also
be processed using an E 403 in an
E 439.
Insert E 118
Areas of application
27
To Next Page
Loading...
