Problem solving guide
33
Some minor problems can be corrected without contacting Miele.
If, having followed the suggestions below, you still cannot resolve the problem,
please contact Miele.
To prevent unnecessary loss of temperature it is advisable not to open the door
while waiting for the appliance to be serviced.
Unauthorised installation, maintenance and repairs can cause considerable
danger for the user.
Installation, maintenance and repairs must only be carried out by a Miele
authorised technician.
Problem Cause and remedy
The appliance does not
get cold and the
temperature display is
not lit up.
The appliance has not been switched on.
Switch the appliance on.
The plug is not inserted in the socket correctly.
Insert the plug into the socket correctly and switch
on.
Check whether the mains fuse has tripped. There
could be a fault with the appliance, the household
electrical wiring or another electrical appliance.
Contact a qualified electrician or Miele Service.
The temperature display
is lit up, but the
appliance is not getting
cold.
Demo mode is switched on. This allows the appliance
to be presented in the showroom without the cooling
system being switched on. Do not activate this setting
for domestic use.
Contact the Miele Service Department for
information on deactivating Demo mode.
To Next Page
Loading...
Need help?
General
