Changing the door hinging
47
Before building the appliance in, you
will need to decide on which side the
door is to be hinged. If left hand hinging
is required, follow the instructions
below.
To change the door hinging, you will
need the following tools:
Appliance door
Open the appliance door.
Remove covers , and with a
screwdriver.
Loosen fixing screws slightly.
Push the appliance dooroutwards,
take it off its hinges and place it to
one side.
Now remove fixing screws
completely and screw them loosely
into position at the top and
bottom on the opposite side.
Use a power screwdriver to secure
the hinges. The screws are self-
tapping.
If you have put locking pins into the
hinges to stop the door opening too far:
To Next Page
Loading...
Need help?
General
