Changing the door hinging
49
(depending on model)
Changing the hinging of the
freezer compartment door
Open the freezer compartment door
.
Flip the cover on bearing block
down.
Unscrew bearing block and take
off the freezer compartment door
together with the bearing block.
Unscrew door catch.
Screw door catch into place on the
opposite side, having turned it by
180°C.
Plug the holes with stoppers
supplied.
Fit bearing block together with
freezer compartment door in
position at the top, then tighten
bearing block securely.
Flip the cover on bearing block
back up.
To Next Page
Loading...
Need help?
General
